A Deep Learninag based Non-invasive and Real-Time Fault Detection System for 3-Phase Induction Motors
DOI:
https://doi.org/10.30537/sjet.v4i1.777Keywords:
Deep Learning, Current Signatures, Non-invasive, Raspberry-pi, Induction MotorAbstract
Induction motor plays a major role in industry. Despite of its strong structure, induction motors are often prone to faults. There are different types of faults that occurs in the induction motor such as bearing faults, winding faults, etc. Thus motors in major applications require continuous and effective monitoring. In this paper, a stand-alone and non-invasive condition monitoring system that can monitor the condition of 3-phase induction motor using motor current signatures with aid of deep learning (DL) approaches. The proposed system extracts the features using non-invasive current sensors it further samples the features using an analog to digital converter (ADC) and organizes the data acquired from ADC using Raspberry-pi microcomputer. The current data acquired from induction motor is used to train and test the DL models including Multilayer Perceptron (MLP), Long Short-term Memory (LSTM), and One-Dimensional Convolutional Neural Networks (1DCNN). The comparative analysis is demonstrated and the LSTM model as best fault classifier among all with accuracy up to 100%. Finally, the real-time testing of the device showed that the developed system can effectively monitor the conditions of motor using non-invasive current sensors.
Downloads
References
[2] M. S. Moiz, S. Shamim, M. Abdullah, H. Khan, I. Hussain, A. B. Iftikhar, et al., "Health Monitoring of Three-Phase Induction Motor Using Current and Vibration Signature Analysis," in 2019 International Conference on Robotics and Automation in Industry (ICRAI), 2019, pp. 1-4.
[3] H. Khelfi and S. Hamdani, "Induction motor rotor fault diagnosis using three-phase current intersection signal," Electrical Engineering, vol. 102, pp. 539-548, 2020.
[4] X. Liang and K. Edomwandekhoe, "Condition monitoring techniques for induction motors," in 2017 IEEE Industry Applications Society Annual Meeting, 2017, pp. 1-10.
[5] A. Choudhary, D. Goyal, S. L. Shimi, and A. Akula, "Condition monitoring and fault diagnosis of induction motors: A review," Archives of Computational Methods in Engineering, vol. 26, pp. 1221-1238, 2019.
[6] A. Glowacz, W. Glowacz, J. Kozik, K. Piech, M. Gutten, W. Caesarendra, et al., "Detection of deterioration of three-phase induction motor using vibration signals," Measurement Science Review vol. 19, pp. 241-249, 2019.
[7] D. K. Soother and J. Daudpoto, "A brief review of condition monitoring techniques for the induction motor," Transactions of the Canadian Society for Mechanical Engineering, vol. 43, pp. 499-508, 2019.
[8] Y. Yuan, G. Ma, C. Cheng, B. Zhou, H. Zhao, H.-T. Zhang, et al., "A general end-to-end diagnosis framework for manufacturing systems," National Science Review, vol. 7, pp. 418-429, 2020.
[9] K. D. Kompella, M. V. G. Rao, and R. S. Rao, "Bearing fault detection in a 3 phase induction motor using stator current frequency spectral subtraction with various wavelet decomposition techniques," Ain Shams Engineering Journal, vol. 9, pp. 2427-2439, 2018.
[10] R. Palácios, W. Godoy, A. Goedtel, I. da Silva, D. Moríñigo-Sotelo, and O. Duque-Perez, "Time domain diagnosis of multiple faults in three phase induction motors using inteligent approaches," in 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED), 2017, pp. 85-89.
[11] B. Corne, B. Vervisch, S. Derammelaere, J. Knockaert, and J. Desmet, "The reflection of evolving bearing faults in the stator current’s extended park vector approach for induction machines," Mechanical Systems and Signal Processing, vol. 107, pp. 168-182, 2018.
[12] S. Namuduri, B. N. Narayanan, V. S. P. Davuluru, L. Burton, and S. Bhansali, "Deep Learning Methods for Sensor Based Predictive Maintenance and Future Perspectives for Electrochemical Sensors," Journal of The Electrochemical Society, vol. 167, p. 037552, 2020.
[13] R. Zhao, R. Yan, Z. Chen, K. Mao, P. Wang, and R. X. Gao, "Deep learning and its applications to machine health monitoring," Mechanical Systems and Signal Processing, vol. 115, pp. 213-237, 2019.
[14] G. Toh and J. Park, "Review of Vibration-Based Structural Health Monitoring Using Deep Learning," Applied Sciences, vol. 10, p. 1680, 2020.
[15] C. Morales-Perez, J. Rangel-Magdaleno, H. Peregrina-Barreto, and J. Ramirez-Cortes, "Bearing Fault Detection on IM Using MCSA and Sparse Representation," in 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 2020, pp. 1-6.
[16] M. Valtierra-Rodriguez, J. R. Rivera-Guillen, J. A. Basurto-Hurtado, J. J. De-Santiago-Perez, D. Granados-Lieberman, and J. P. Amezquita-Sanchez, "Convolutional Neural Network and Motor Current Signature Analysis during the Transient State for Detection of Broken Rotor Bars in Induction Motors," Sensors, vol. 20, p. 3721, 2020.
[17] C. Sun, J. Xu, L. Xu, G. Wang, and Y. Xu, "Research on locomotive motor bearing diagnosis method based on wavelet threshold denoising and correlation analysis combined with EMD decomposition and LSTM neural network," in 2020 Chinese Control And Decision Conference (CCDC), 2020, pp. 2770-2775.
[18] G. H. Bazan, P. R. Scalassara, W. Endo, A. Goedtel, W. F. Godoy, and R. H. C. Palácios, "Stator fault analysis of three-phase induction motors using information measures and artificial neural networks," Electric Power Systems Research, vol. 143, pp. 347-356, 2017.
[19] D. K. Soother, J. Daudpoto, and A. Shaikh, "Vibration Measurement System for the Low Power Induction Motor," Engineering Science And Technology International Research Journal, vol. 2, pp. 53-57, 2018.
[20] M. Irfan, N. Saad, R. Ibrahim, V. S. Asirvadam, N. M. Nor, A. Alwadie, et al., "A hardware and software integration approach for development of a non-invasive condition monitoring systems for motor-coupled gears faults diagnosis," in Asian Simulation Conference, 2017, pp. 642-655.
[21] T. Instruments, "Texas Instruments," https://www.ti.com/product/ADS1015. [Last Accessed: 10 Jan 2020].
[22] "Raspberry Pi 4B," https://www.raspberrypi.org/products/raspberry-pi-4-model-b/, [Last Accessed: 10 Jan 2020].
Downloads
Published
Issue
Section
License
The SJET holds the rights of all the published papers. Authors are required to transfer copyrights to journal to make sure that the paper is solely published in SJET, however, authors and readers can freely read, download, copy, distribute, print, search, or link to the full texts of its articles and to use them for any other lawful purpose.
The SJET is licensed under Creative Commons Attribution-NonCommercial 4.0 International License.
