IoT Based Smart Segregation Chamber for the Recovery of Metals from E-waste

Authors

  • Shahzor Memon Hamdard University Karachi
  • Sadiq-ur-Rehman Iqra University Karachi
  • Abdul Rehman Department of Electrical Engineering, Hamdard University Karachi.
  • Ahmer jamal Department of Electrical Engineering, Hamdard University Karachi.
  • Abdul Hameed Memon Department of Mechanical Engineering, Hamdard University Karachi.
  • Muhammad Shakir Shaikh Department of Artificial Intelligence and computing, Szabist University Karachi.

DOI:

https://doi.org/10.30537/fq5qmz28

Keywords:

E waste, Conveyoy System, IoT, Microcontroller

Abstract

Electronic garbage, or "e-waste," is a major problem in today's technologically advanced world due to the extensive usage of electronic gadgets. Pakistan is a country where the problem is extremely prevalent, and Karachi is among the most impacted cities. Severe environmental and health dangers arise from improper disposal of e-waste, and the situation is made worse by the region's current, frequently insufficient and unregulated recycling procedures. A cutting-edge technology has been proposed that ensures the safe handling and processing of e-waste to address this problem. This creative solution effectively separates valuable metals from electronic waste with sorting accuracy of 95% and shows the parameters like conveyor motor temperature and current for safe handling of the conveyor system through IoT platform and monitoring.

References

[1] Hegde, Prarthana, Akhilesh Kamtikar, Diksha Kadam, and Jahida Subhedar. "Design and Implementation of Metal Waste Sorting using Microcontroller and IoT."

[2] Elangovan, S., S. Sasikala, S. Arun Kumar, M. Bharathi, E. Naveen Sangath, and T. Subashini. "A deep learning based multiclass segregation of e-waste using hardware software co- simulation." In Journal of Physics: Conference Series, vol. 1997, no. 1, p. 012039. IOP Publishing, 2021.

[3] Gundupalli, Sathish Paulraj, Subrata Hait, and Atul Thakur. "Classification of metallic and non-metallic fractions of e-waste using thermal imaging-based technique." Process Safety and Environmental Protection 118 (2018): 32-39.

[4] Ashiq, Ahamed, Janhavi Kulkarni, and Meththika Vithanage. "Hydrometallurgical recovery of metals from E-waste." InElectronic waste management and treatment technology, pp. 225-246. Butterworth- Heinemann, 2019.

[5] Choubey, Sourav, Prerna Goswami, and Shina Gautam. "AI based sustainable approach for metal extraction from e-waste: a comprehensive literature review." In 2020 3rd International Conference on Intelligent Sustainable Systems (ICISS), pp. 1445-1449. IEEE, 2020.

[6] Punjab Urban Land Systems Enhancement (PULSE), Project (P172945) Board of Revenue, Government of the Punjab, September 13, 2021

https://pulse.gop.pk/wp- content/Awareness/PULSE- EWMP .pdf

[7] The report, released simultaneously in New York and Geneva by the World Health Organization (WHO) Published in Dawn, June 16th, 2021

[8] Andrade, Daniel Fernandes, João Paulo Romanelli, and Edenir Rodrigues Pereira-Filho. "Past and emerging topics related to electronic waste management: top countries, trends, and perspectives." Environmental Science and Pollution Research 26 (2019): 17135-17151.

[9] Rene, Eldon R., Manivannan Sethurajan, Vinoth Kumar Ponnusamy, Gopalakrishnan Kumar, Thi Ngoc Bao Dung, Kathirvel Brindhadevi, and Arivalagan Pugazhendhi. "Electronic waste generation, recycling and resource recovery: Technological perspectives and trends."Journal of Hazardous Materials 416 (2021): 125664.

[10] Yang, Wan-Dong, Qing Sun, and Hong-Gang Ni. "Cost-benefit analysis of metal recovery from e-waste: Implications for international

policy." Waste (2021): 42-47.

[11]Prema, P ., M. Kanishka, S. Aiswarya, C. Gowtham, and P . Jagadeesh. "Image analysis for segregation of e-waste materials using deep learning." In 2024 13th International Conference on System Modeling & Advancement in Research Trends (SMART), pp. 60-64. IEEE, 2024

[12] Oise, Godfrey, and Susan Konyeha."E-waste management through deep learning: a sequential neural network approach." Fudma Journal Of Sciences 8, no. 4 (2024): 17-24.

[13] M Eriyadi, S B Mulia and R Purnomo, “Automatic metal sorting conveyor machine based on Programmable Logic Controller,” International Symposium on Materials and Electrical Engineering (ISMEE), 2020

[14] S. Elangovan, S. Sasikala, S. Arun Kumar, M. Bharathi, E. Naveen Sangath' and T. Subashini “A Deep Learning Based Multiclass Segregation of E-waste using Hardware Software Co-Simulation” S. Elangovan et al 2021 J. Phys.: Conf. Ser. 1997 012039

DOI 10.1088/1742- 6596/1997/1/012039

[15] Gundupalli, Sathish & Hait, Subrata & Thakur, Atul & Trivedi, Amber. (2018). Classification of Recyclables from E-Waste Stream Using Thermal Imaging-Based Technique. 10.1061/9780784482025.008.

[16] Barragan JA, Ponce de León C, Alemán Castro JR, Peregrina-Lucano A, Gómez-Zamudio F, Larios-Durán ER. Copper and Antimony Recovery from Electronic Waste by Hydrometallurgical Electrochemical Techniques. ACS Omega. 2020 May 6;5(21):12355- 12363. doi: 10.1021/acsomega.0c01100. PMID: 32548419; PMCID: PMC7271356.

[17] Wath, B., and S. Ughade. "Microcontroller Based Separation of Metal from Garbage Waste." Researchgate.Net (2019).

Downloads

Published

2026-06-15

Similar Articles

1-10 of 54

You may also start an advanced similarity search for this article.